IEA’s Report on 1st- to 2nd-Generation Biofuel Technologies

Posted on March 9, 2009. Filed under: Advanced Biofuel, Field-to-Pump | Tags: , , , , |

IEA’s Report on 1st- to 2nd-Generation Biofuel Technologies

by Ralph E. H. Sims & Michael Taylor (International Energy Agency)
March 9, 2009

The current debate over biofuels produced from food crops has pinned a lot of hope on “2nd-generation biofuels” produced from crop and forest residues and from non-food energy crops. This IEA report, produced jointly with IEA Bioenergy, examines the current state-of-the-art and the challenges for 2nd-generation biofuel technologies. It evaluates their costs and considers policies to support their development and deployment.

It is increasingly understood that 1st-generation biofuels produced primarily from food crops are limited in their ability to achieve targets for oil-product substitution, climate change mitigation and economic growth. Their sustainable production is under review, as is the possibility of creating undue competition for land and water used for food and fiber production. A possible exception that appears to meet many of the acceptable criteria is ethanol produced from sugar cane.

The cumulative impacts of these concerns have increased the interest in developing biofuels produced from non-food biomass. These “2nd-generation biofuels” could avoid many of the concerns facing 1st-generation biofuels and potentially offer greater cost reduction potential in the longer term.

Our recent IEA report looks at the technical challenges facing 2nd-generation biofuels, evaluates their costs and examines related current policies to support their development and deployment. The potential for production of more advanced biofuels is also discussed. Policy recommendations are given as to how these constraints to commercial deployment might best be overcome in the future.

While most analyses continue to indicate that 1st-generation biofuels show a net benefit in terms of GHG emissions reduction and energy balance, they also have several drawbacks. Current concerns for many, but not all, of the 1st-generation biofuels are that they:

  • contribute to higher food prices due to competition with food crops;

  • are an expensive option for energy security taking into account total production costs excluding government grants and subsidies;

  • provide only limited GHG reduction benefits (with the exception of sugarcane ethanol, Fig. 1) and at relatively high costs in terms of $/tonne of carbon dioxide ($/t CO2) avoided;

  • do not meet their claimed environmental benefits because the biomass feedstock may not always be produced sustainably;

  • are accelerating deforestation (with other potentially indirect land use effects also to be accounted for);

  • potentially have a negative impact on biodiversity; and

  • compete for scarce water resources in some regions.


Figure 1. Well-to-wheel emission changes for a range of 1st- and 2nd-generation biofuels (excluding land use change) compared with gasoline or mineral diesel. Source: OECD, 2008 based on IEA and UNEP analysis of 60 published life-cycle analysis studies giving either ranges (shown by the bars) or specific data (shown by the dots).

Additional uncertainty has also recently been raised about GHG savings if indirect land use change is taken into account.

Second Generation Biofuels

Many of the problems associated with 1st-generation biofuels can be addressed by the production of biofuels manufactured from agricultural and forest residues and from non-food crop feedstocks. Where the ligno-cellulosic feedstock is to be produced from specialist energy crops grown on arable land, several concerns remain over competing land use, although energy yields (in terms of GJ/ha) are likely to be higher than if crops grown for 1st-generation biofuels (and co-products) are produced on the same land. In addition poorer quality land could possibly be utilized.

Given the current investments being made to gain improvements in technology, some expectations have arisen that, in the near future, these biofuels will reach full commercialization. This would allow much greater volumes to be produced at the same time as avoiding many of the drawbacks of 1st-generation biofuels. However, from this IEA analysis, it is expected that, at least in the near to medium-term, the biofuel industry will grow only at a steady rate and encompass both 1st- and 2nd-generation technologies that meet agreed environmental, sustainability and economic policy goals.

The transition to an integrated 1st- and 2nd generation biofuel landscape is therefore most likely to encompass the next one to two decades, as the infrastructure and experiences gained from deploying and using 1st-generation biofuels is transferred to support and guide 2nd-generation biofuel development.

Conversion Routes

The production of biofuels from ligno-cellulosic feedstocks can be achieved through two very different processing routes both currently at the demonstration phase.

  • Biochemical — in which enzymes and other micro-organisms are used to convert cellulose and hemicellulose components of the feedstocks to sugars prior to their fermentation to produce ethanol;

  • Thermo-chemical — where pyrolysis/gasification technologies produce a synthesis gas (CO + H2) from which a wide range of long carbon chain biofuels, such as synthetic diesel or aviation fuel, can be reformed.

These are not the only 2nd generation biofuels pathways, and several variations and alternatives are under evaluation in research laboratories and pilot-plants including dimethyl ether, methanol or synthetic natural gas. However, at this stage these alternatives do not represent the main thrust of RD&D investment.

Based on the announced plans of companies developing 2nd-generation biofuel facilities, the first fully commercial-scale operations could possibly be seen as early as 2012 if demonstrations prove successful. However given the complexity of the technical and economic challenges involved, in reality, the first commercial plants are unlikely to be widely deployed before 2020.

Preferred Technology Route

There is currently no clear commercial or technical advantage between the two pathways, even after many years of RD&D and the development of near-commercial demonstrations. Both sets of technologies remain unproven at the fully commercial scale, are under continual development and evaluation, and have significant technical and environmental barriers yet to be overcome.

For the biochemical route, much remains to be done in terms of improving feedstock characteristics; reducing the costs by perfecting pretreatment; improving the efficacy of enzymes and lowering their production costs; and improving overall process integration. The potential advantage of the biochemical route is that cost reductions have proved reasonably successful to date, so it could possibly provide cheaper biofuels than via the thermo-chemical route.

Conversely, as a broad generalization, there are less technical hurdles to the thermo-chemical route since much of the technology is already proven. One problem concerns securing a large enough quantity of feedstock for a reasonable delivered cost at the plant gate in order to meet the large commercial-scale required to become economically viable (Table 1). Also perfecting the gasification of biomass reliably and at reasonable cost has yet to be achieved, although good progress is being made.

Table 1 shows the typical scale of operation for various 2nd-generation biofuel plants using energy crop-based ligno-cellulosic feedstocks.

Type of plant

Plant capacity ranges, and assumed annual hours of operation.

Biomass fuel required. (oven dry tonnes / year)

Truck vehicle movements for delivery to the plant.

Land area required to produce the biomass. (% of total land within a given radius).

Small pilot

15,000-25,000 l/yr 2000 hr


3 – 5 / yr

1 – 3% within
1 km radius


40,000-500,000 l/yr 3000 hr


10 – 140 / yr

5 – 10% within
2 km radius


1-4 M l/yr
4000 hr


25 – 100 / month

1 – 3% within
10 km radius


25-50 M l/yr

5000 hr


10 – 20 / day

5 – 10% within
20 km radius

Large commercial

150-250 M l/yr
7000 hr


100 – 200 / day and night

1-2% within
100 km radius

Note: The land area requirement would be reduced where crop and forest residue feedstocks are available.

One key difference between the biochemical and thermo-chemical routes is that the lignin component is a residue of the enzymatic hydrolysis process and hence can be used for heat and power generation. In the BTL process it is converted into synthesis gas along with the cellulose and hemicellulose biomass components. Both processes can potentially convert 1 dry tonne of biomass (~20 GJ/t) to around 6.5 GJ/t of energy carrier in the form of biofuels giving an overall biomass to biofuel conversion efficiency of around 35%. Although this efficiency appears relatively low, overall efficiencies of the process can be improved when surplus heat, power and co-product generation are included in the total system.

Although both routes have similar potential yields in energy terms, different yields, in terms of liters per tonne of feedstock, occur in practice. Typically enzyme hydrolysis could be expected to produce up to 300 l ethanol / dry tonne of biomass whereas the BTL route could yield up to 200 l of synthetic diesel per tonne but with a higher energy density by volume.

A second major difference is that biochemical routes produce ethanol whereas the thermo-chemical routes can also be used to produce a range of longer-chain hydrocarbons from the synthesis gas. These include biofuels better suited for aviation and marine purposes. Only time will tell which conversion route will be preferred, but whereas there may be alternative drives becoming available for light vehicles in future (including hybrids, electric plug-ins and fuel cells), such alternatives for airplanes, boats and heavy trucks are less likely and liquid fuels will continue to dominate.

Production Costs

The full biofuel production costs associated with both pathways remain uncertain and are treated with a high degree of commercial propriety. Comparisons between the biochemical and thermo-chemical routes have proven to be very contentious within the industry, with the lack of any real published cost data being a major issue for the industry.

The commercial-scale production costs of 2nd-generation biofuels have been estimated by the IEA to be in the range of US $0.80 – 1.00/liter of gasoline equivalent (lge) [US $3.02-$3.79 per gallon] for ethanol and at least US $1.00/liter [$3.79 per gallon] of diesel equivalent for synthetic diesel. This range broadly relates to gasoline or diesel wholesale prices (measured in USD /lge) when the crude oil price is between US $100-130 /bbl (Fig. 2). The present widely fluctuating oil and gas prices therefore make investment in 2nd-generation biofuels at current production costs a high risk venture.


Figure 2. Production cost ranges for 2nd-generation biofuels in 2006 (USD / liter gasoline equivalent) compared with wholesale petroleum fuel prices correlated with the crude oil price over a 16-month period, and 2030 projections assuming significant investment in RDD&D.

If commercialization succeeds and rapid deployment occurs world-wide beyond 2020, then costs could decline to between US $0.55 and 0.60/lge [US $2.08 – $2.27 per gallon] for both ethanol and synthetic diesel by 2030. Ethanol would then be competitive at around US $70/bbl (2008 dollars) and synthetic diesel and aviation fuel at around US $80/bbl.

Implications for Policies

Promotion of 2nd-generation biofuels can help provide solutions to multiple issues including energy security and diversification, rural economic development, GHG mitigation and help reduce other environmental impacts (at least relative to those from the use of other transport fuels). Policies designed to support the promotion of 2nd-generation biofuels must be carefully developed if they are to avoid unwanted consequences and potentially delay commercialization.

One related view is that the relatively high cost of support currently offered for many 1st-generation biofuels is an impediment to the development of 2nd-generation biofuels, as the goals of some current policies that support the industry (with grants and subsidies for example) are not always in alignment with policies that foster innovation.

This report leans more towards the position that advances in technology will enable 2nd-generation biofuels to build on the infrastructure and markets established by 1st-generation biofuels but will provide a cheaper and more sustainable alternative. This assumes that future policy support will be carefully designed in order to foster the transition from 1st- to 2nd- generation and take into account the specificities of 1st- and 2nd- generation biofuels, the production of sustainable feedstocks, and other related policy goals being considered.

Key points are that:

  • policies to support 1st- or 2nd-generation biofuels should be part of a comprehensive strategy to reduce CO2 emissions;

  • enhanced RD&D investment in 2nd-generation biofuels is needed;

  • accelerating the demonstration of commercial-scale 2nd generation biofuels in different regions is required;

  • deployment policies for 2nd-generation biofuels are either blending targets or tax credits; and

  • environmental performance and certification schemes need to be developed.


The key messages arising from the study are:

  • technical barriers remain for 2nd-generation biofuel production;

  • production costs are uncertain and vary with the feedstock available, but are currently thought to be around US $0.80 – 1.00/liter [US $3.02-$3.79 per gallon] of gasoline equivalent;

  • there is no clear candidate for “best technology pathway” between the competing biochemical and thermo-chemical routes;

  • the development and monitoring of several large-scale demonstration projects is essential to provide accurate comparative data;

  • even at high oil prices, 2nd-generation biofuels will probably not become fully commercial nor enter the market for several years to come without significant additional government support;

  • considerably more investment in RD&D is needed to ensure that future production of the various biomass feedstocks can be undertaken sustainably and that the preferred conversion technologies are identified and proven; and

  • once proven, there will be a steady transition from 1st- to 2nd-generation biofuels (with the exception of sugarcane ethanol that will continue to be produced sustainably in several countries).

Policies designed to reward environmental performance and sustainability of biofuels, as well as to encourage provision of a more abundant and geographically extensive feedstock supply, could see 2nd-generation products begin to eclipse 1st-generation alternatives in the medium to longer-term.


With support from the Italian Ministry for the Environment, Land and Sea, the IEA was able to provide this contribution to the program of work of the Global Bioenergy Partnership, initiated by the G8 countries at the 2005 Summit at Gleneagles and with its Secretariat based in Rome at the Food and Agriculture Organisation of the United Nations.

The full 124 page report is available on the IEA website as a free publication download.

This article was written in collaboration with Jack Saddler and Warren Mabee (IEA Bioenergy).

Ralph Sims is Professor of Sustainable Energy at Massey University, New Zealand where he began his research career producing biodiesel from animal fats in the early 1970s. He is currently based at the Renewable Energy Unit of the International Energy Agency, Paris. He was the Coordinating Lead Author of the “Energy Supply” chapter of the IPCC 4th Assessment Report and is a Companion of the Royal Society. His many publications on energy and climate change mitigation include the book “The Brilliance of Bioenergy – in Business and in Practice.”

About Renergie

Renergie was formed by Ms. Meaghan M. Donovan on March 22, 2006 for the purpose of raising capital to develop, construct, own and operate a network of ten ethanol plants in the parishes of the State of Louisiana which were devastated by hurricanes Katrina and Rita.  Each ethanol plant will have a production capacity of five million gallons per year (5 MGY) of fuel-grade ethanol.  Renergie’s “field-to-pump” strategy is to produce non-corn ethanol locally and directly market non-corn ethanol locally. On February 26, 2008, Renergie was one of 8 recipients, selected from 139 grant applicants, to share $12.5 million from the Florida Department of Environmental Protection’s Renewable Energy Technologies Grants Program.  Renergie received $1,500,483 (partial funding) in grant money to design and build Florida’s first ethanol plant capable of producing fuel-grade ethanol solely from sweet sorghum juice. On  April 2, 2008, Enterprise Florida, Inc., the state’s economic development organization, selected Renergie as one of Florida’s most innovative technology companies in the alternative energy sector.  On January 20, 2009, Florida Energy & Climate Commission amended RET Grant Agreement S0386 to increase Renergie’s funding from $1,500,483 to $2,500,000. By blending fuel-grade ethanol with gasoline at the gas station pump, Renergie will offer the consumer a fuel that is renewable, more economical, cleaner, and more efficient than unleaded gasoline.  Moreover, the Renergie project will mark the first time that Louisiana farmers will share in the profits realized from the sale of value-added products made from their crops.


Make a Comment

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


    Renergie created “field-to-pump," a unique strategy to locally produce and market advanced biofuel (“non-corn fuel ethanol”) via a network of small advanced biofuel manufacturing facilities. The purpose of “field-to-pump” is to maximize rural development and job creation while minimizing feedstock supply risk and the burden on local water supplies.


    Subscribe Via RSS

    • Subscribe with Bloglines
    • Add your feed to Newsburst from CNET
    • Subscribe in Google Reader
    • Add to My Yahoo!
    • Subscribe in NewsGator Online
    • The latest comments to all posts in RSS


Liked it here?
Why not try sites on the blogroll...

%d bloggers like this: